Application:
Recommended for support of standard conduit, cable and steel pipe on walls or sides of beams. Not recommended for use horizontally on ceilings, bottoms of beams and similar installations since the factor of safety is greatly reduced when so used.
Contruction:
HALF SADDDLE consists of piece of steel shaped to proper configuration as shown in above diagram.
Material:
Steel. Also other materials can also be provided on request
Maximum Temperature:
343°C (650°F)
Finish Available:
Plain, Hot Dip Galvanized, Electro-Galvanized.
Annealed Bare/Tinned high conductivity copper (solid / stranded ) PVC/PE/XLPE insulated. Insulated cores laid up in concentric layers. Extruded PVC inner sheathed, overall extruded PVC/PE/XLPE sheathed. Galvanised Mild steel armouring will be provided with wire / strip / tape over inner sheath in case of armoured cables.
| Product Code | Nominal Pipe Size | Diameter (mm) | Screw Size | ||
|---|---|---|---|---|---|
| Inch | MM | ||||
| SMI-HS-0.50 | 1⁄2” | DN15 | 21.3 | M6 | |
| SMI-HS-0.75 | 3⁄4” | DN20 | 26.7 | M6 | |
| SMI-HS-01 | 1" | DN25 | 33.4 | M6 | |
| SMI-HS-1.25 | 1 1/4" | DN32 | 42.1 | M6 | |
| SMI-HS-1.50 | 1 1/2" | DN40 | 48.2 | M6 | |
| SMI-HS-54 | - | - | 54 | M6 | |
| SMI-HS-02 | 2" | DN50 | 60.3 | M6 | |
| SMI-HS-67 | - | - | 67 | M6 | |
| SMI-HS-2.50 | 2 1/2" | DN65 | 73.0 | M6 | |
| SMI-HS-10 | - | - | 82 | M6 | |
