Application:
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be use for supporting pipes along roof.
Contruction:
PIPE HANGER with EPDM lining consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate. The selection of the proper PIPE HANGER WITH EPDM LINING depends upon the temperature of the piping system and load to be carried. Permits installation before and after pipe is in place. Reduces noise upto 18 dB.
Material:
Carbon Steel. Also other materials can also be provided on request
Temperature Range:
- 20°C to 110°C
Finish Available:
Plain, Hot Dip Galvanized, Electro-Galvanized.
| Product Code |
Nominal Pipe Size |
Pipe OD (mm) |
Range | Hanger Rod Size (mm) (A ) |
Side Screw Size |
Max Load (KG) |
|
|---|---|---|---|---|---|---|---|
| Inch | MM | ||||||
|
SMI-ULNCL 0.5 |
1⁄2” |
DN15 |
21.3 |
20-25 |
M10 |
M6 |
460 |
|
SMI-ULNCL 0.75 |
3⁄4” |
DN20 |
26.7 |
26-30 |
M10 |
M6 |
460 |
|
SMI-ULNCL 01 |
1" |
DN25 |
33.4 |
32-36 |
M10 |
M6 |
460 |
|
SMI-ULNCL 1.25 |
1 1⁄4” |
DN32 |
42.1 |
38-43 |
M10 |
M6 |
460 |
|
SMI-ULNCL 1.50 |
1 1⁄2” |
DN40 |
48.2 |
47-51 |
M10 |
M6 |
460 |
|
SMI-ULNCL 02 |
2" |
DN50 |
60.3 |
60-64 |
M10 |
M6 |
460 |
|
SMI-ULNCL 2.50 |
2 1⁄2” |
DN65 |
73.0 |
74-80 |
M10 |
M6 |
570 |
|
SMI-ULNCL 03 |
3" |
DN80 |
88.9 |
87-92 |
M10 |
M6 |
570 |
|
SMI-ULNCL 3.50 |
3 1⁄2” |
DN90 |
101.6 |
99-105 |
M10 |
M6 |
570 |
|
SMI-ULNCL 04 |
4" |
DN100 |
114.3 |
113-118 |
M10 |
M6 |
570 |
|
SMI-ULNCL 05 |
5” |
DN125 |
141.3 |
138-142 |
M12 |
M6 |
570 |
|
SMI-ULNCL 06 |
6" |
DN150 |
168.3 |
168-172 |
M12 |
M8 |
570 |
|
SMI-ULNCL 08 |
8" |
DN200 |
219.1 |
215-220 |
M12 |
M8 |
930 |
