Application:
Riser clamps with lining are recommended for the support and/or restraint of vertical steel pipes. A RISER CLAMP with lining is designed to attach to the pipe and to rest on a structural member or floor; it is not designed to have hanger rods attached to it to support the pipe.
Contruction:
Riser clamps with lining consists of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes.
The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load. Reduces noise upto 18dB.
Material:
Steel. Also other materials can also be provided on request
Temperature Range:
-20°C to 110°C
Finish Available:
Plain, Hot Dip Galvanized, Electro-Galvanized.
| Product Code | Nominal Pipe Size | Pipe OD (mm) | Height | Hanger Rod size (mm) | Max Load (KG) | |
|---|---|---|---|---|---|---|
| Inch | MM | D | H | R | ||
| SMI-SH-0.75 | 3⁄4 | DN20 | 26.7 | 61 | M10 | 220 |
| SMI-SH-01 | 1" | DN25 | 33.4 | 70 | M10 | 220 |
| SMI-SH-1.25 | 1, 1/4" | DN32 | 42.1 | 78 | M10 | 220 |
| SMI-SH-1.5 | 1, 1/2" | DN40 | 48.2 | 84 | M10 | 220 |
| SMI-SH-02 | 2” | DN50 | 60.3 | 102 | M10 | 220 |
| SMI-SH-2.5 | 2 1⁄2” | DN65 | 73 | 118 | M10 | 300 |
| SMI-SH-03 | 3” | DN80 | 88.9 | 144 | M10 | 300 |
| SMI-SH-04 | 4” | DN100 | 114.3 | 176 | M10 | 300 |
| SMI-SH-06 | 6” | DN150 | 168.3 | 262 | M12 | 550 |
| SMI-SH-08 | 8” | DN200 | 219.1 | 305 | M12 | 1300 |
| SMI-SH-10 | 10’’ | DN250 | 273 | 315 | M12 | 1300 |
| SMI-SH-12 | 12’’ | DN300 | 323.8 | 378 | M12 | 1300 |
